Setup

Set up Tripwire Home

Everything happens in the free Thalrix Spyder app. Setup takes about five minutes once the unit is plugged in.

Get the app

Download for iPhone I have the app: open it

Connect and power on

  1. Plug in the injector

    Plug the long cable from the unit into the injector port with the lightning bolt, and the injector’s power cord into an outlet. For the most reliable connection, also connect the port with the arrows (‹···›) to your router with the short patch cable.

  2. Create your account

    Open the app, sign up with your email and verify it. Allow notifications when asked: that is how alerts reach you.

  3. Scan the claim sticker

    Scan the QR on the claim sticker with the app, or with your phone’s camera. You can also type the 8-character code printed under it.

  4. Connect Wi-Fi, if you’re not using the router cable

    The app connects to the unit over Bluetooth and walks you through joining your 2.4 GHz Wi-Fi. Stay near the unit while you do it.

  5. Check it’s online

    The unit has no button and no lights. The app shows when it is online, usually within a minute or two.

Not installed yet?

Mounting, running the cable inside and troubleshooting are in the install guides. Still stuck? Email support@thalrix.com and a person will answer.